Aver SD1306 user manual Instrukcja Użytkownika

AVer SD1306 User Manual

6 Product Installation Monitor Setting 1. Right-click on the desktop. Select “ Properties” 2. Change “Color quality” to “Highest (32-bit)”.

7 Hardware Installation and I/O Pin Assignment 1. Install SD1306 with wall mount Step 1: Install the base on the wall. Step 2: Install the camera

8 3. Instruction to remove cameral module from camera housing and install cables a. Unscrew the screws on the four corners. b. Release the lo

9 4. I/O Configuration  I/O Connection a. Please connect the G & AO pin to the external relay (buzzer) device. b. Please connect the G &a

10 If you select "N.C" in "Input sensor setting", when external device or circuit makes DI and GND pin disconnected, the camera i

11 Power Over Ethernet (PoE) Set up the IP camera through Power over Ethernet (PoE). PoE is a technology that integrates power into a standard LAN in

12 IP Assignment There are two ways to find IP Camera:  Finding IP Camera by using the “NXU Lite recording software”  Finding IP Camera by using

13 3. Click the “Setup” button. 4. Click the “Add IPCam” button. 5. Select the “IP Camera” item.

14 6. Enter IP Camera’s ID and Password (default is admin/admin) and click “Auto Search” to find camera. 7. In Search Result window, click it th

15 Finding IP Camera by using “AVer IPCam Utility” 1. Use the software, “AVer IPCam Utility” to assign the IP address of the IP camera. The software

Table of Contents PREFACE ...

16 5. The IE browser will open and direct you to IP camera login page. This requires IPViewer.ocx to run. If the IE ActiveX warning message appears

17 Using NON-DHCP Server/Router Network In Non-DHCP server/router network, the static IP address must be assigned to the device each time when addin

18 IP camera IP addresses: A quick way to access remote monitoring is to double-click on a selected IP camera in “Camera Name list” in AVer IPCam

19 Install ActiveX Control The first time you attempt to view the camera video via Internet Explorer, it will ask you to install the ActiveX componen

20 5 When the following dialogue box appears, click “Yes”.

21 Using the IP Camera Browser Interface The admin have the full access to the IP camera browser interface. The menu on the left, you can expand and

22 Name Function (2) Speed To adjust the movement range from number 1~9. The larger number you choose, the bigger movement range you get. (3) Focus

23 Name Function (19) Speaker Turn on the PC’s speaker so that PC side can hear sound from IP camera side. Click this button again to mute this fun

24 Setting a patrol group 1. (After clicking on “Patrol”). To build a new group, select a number from "Patrol" drop-down list, and click &

25 Cruise setting  Number: Setting a cruise number: Create up to 8 types of different movements (speed, Zoom, focus, direction) assigned with 8 num

SYSTEM > GENERAL > MAINTENANCE ... 26 TO UPGRADE THE IP CAMERA FI

26 System > General In this section, only admin level is authorized to configure the IP camera system maintenance and the date and time settings.

27 Name Function (4) Firmware upgrade Upgrade the firmware to the latest version. To Upgrade the IP Camera Firmware 1. Download the file from our w

28 System > General > Date & Time In the “Date & Time” tab, the administrator can set and update the system’s date and time. After fil

29 Name Function (4) Setting Method Select the date & time settings method. Sync with current PC – Obtain the date and time setting on the cur

30  Add user: Enter the user name in “Username”, the password in “Password”, and re-enter the password in “Confirm”. Then, click “Add/Set”.  Us

31 System > Network Setting > Setting  Device Name: Used to name the IP camera to search more easily for this specific one among all connect

32 System > Network Setting > Sever To send out the video via Email or FTP, or to save on NAS.  Mail Setting: Used to send out the video via

33  NAS Settings: Used to send out the video to NAS server. a. Enter necessary information in “Location”, “Workgroup”, “Account Name” and “Passwor

34  Status - Common warning message: Updating! Failed(1), please check your DNS setting. Failed(2), please check your internet connection. Failed

35 System > Network Setting > Other 1 User may need to assign different port to avoid conflict when setting up IP assignment. Click Apply to s

EVENT > ARRANGEMENT > MOTION ... 60 EVENT > ARRANGEMENT &g

36  RTSP Authentication: Select the RTSP authentication mode – disable, basic, or digest.  RTSP Port: setup port for RTSP transmitting (default:

37 System > Network Setting > Other 2 Multicast Setting (based on the RTSP Server): User can setup two streaming based on the RTSP Server.

38 Step 2: Step 3: Select Media/open network stream 3. Select force multicast RTP via TRSP 2. Select Demuxers and RTP/RTSP 1. Select all

39 Step 4: Input rtsp://[IPCAM Address] / [RTSP Path] The URL address should be the same as the RTSP path in Video Stream (System-->Video Stream)

40 [Notice] a. If the received image is not from the required IP camera, please adjust the value. (change either IP address or port number) b. If

41  Bonjour: This function enables MAC systems to link to this IP Camera. Please key in the name here.(Safari supports Bonjour protocol)  LLTD:

42 System > Advance > HTTPS HTTPS (Hypertext Transfer Protocol Secure): Https can help protect streaming data transmission over the internal o

43 Created Request: Setting the secure identification and apply it. There are two ways to set Certificate- Install Signed Certificate or Create Self

44 System > Advance > SNMP SNMP (Simple Network Management Protocol) provides a simple framework for administering networked hardware. To manag

45  SNMPv3: For data security reason, the authentication and encryption assurances are added when developing SNMPv3. The user has to give not only

1 Preface The SD1306 is a 1.3 megapixel outdoor-ready speed dome and offers outstanding HDTV-quality video and 22x zoom. It enables large area

46 System > Advance > Access list You can deny an IP address or a range of IP address so that they cannot access the IP camera. Tick the "

47 System > Advance > QoS/DSCP QoS/DSCP (Quality of Server/Differentiated Services Code-point) specifies a simple mechanism for classifying and

48 System > Image Admin and operator levels can adjust the Image setting. They are: OSD, Preference, Advanced. System > Image> OSD In

49 System > Image > Preference In Preference tab, you can tune the IP camera white balance, change the video orientation, and adjust the brigh

50 System > Image> Advanced Click Default button will back to factory default setting.  Shutter Time: Adjust the shutter time level to get t

51  Day & Night Mode: The camera can detect the light level of environment. If you select "Auto", the image will be turned to black a

52 System > Video Stream > General  Video System: PAL or NTSC.

53 System > Video Stream > Stream1  Basic Mode Click Apply to save the configuration.  Resolution: There are 6 resolutions can be chosen –1

54  Video Bitrate: 32Kbps~1Mbps (the higher the Video Bitrate is, the better the video quality is).  Video Frame Rate: The video refreshing rate

55 System > Video Stream > Stream2  Basic Mode Click Apply to save the configuration.  Resolution: There are 6 resolutions can be chosen –1

2 Specifications Hardware CPU ARM 926EJ RAM 256MB Flash 16MB Image Sensor 1/3” 1.3M Panasonic CMOS sensor Lens Type 22X optical zoom lens Focal Lengt

56  Advanced Mode  Resolution: There are 6 resolutions can be chosen –1280x1024, 1280x960, 1280x720, 640x480, 320x240, 176x144.  Profile: Chose

57 System > Video Stream > Stream3 3GPP Streaming is designed for mobile viewing.  Stream 3 Setting: Enable or Disable 3GPP Streaming.  R

58 System > Audio IP camera supports 2-way audio (mono). User can send audio from IP camera by external microphone to remote site; User can also s

59 System > SD Card Please insert microSD/SDHC card before use it. Make sure pushing microSD/SDHC card into the slot completely.

60 Event > Arrangement > Motion Motion Detection: IP camera only allows whole area motion detection. When motion is triggered, it can send the

61 Event > Arrangement > Preference  Record File:  File Format: IP camera allows 3 different types of recording file to change its recor

62 Event > Schedule  Schedule: After complete the schedule setup, the camera data will be recorded according to the schedule setup.  Snapshot:

63 Event > DI/DO SD1306 supports 2 digital input/1 digital output. When input is triggered, it can trigger the relay and send the video to some sp

64 Output Setting:  Mode setting: The output mode affects the DO or relay out duration.  On/off Switch: Relay status is based on sensor triggered

65 Network Configuration  Configuration 1 a. Internet Access: ADSL or Cable Modem b. IP address: More than one real IP c. IP camera and PC con

3 Network Ethernet 10/100 Base-T Network Protocol IPv6, IPv4, HTTP, HTTPS, SNMP, QoS/DSCP, Access list, RTSP, TCP/IP, UDP, SMTP, FTP, PPPoE, DHCP,

66  Configuration 2 a. Internet Access: ADSL or Cable Modem b. IP address: one real IP c. IP camera and PC connect to the internet d. Device ne

67 Factory Default 1. To recover the default IP address and password, please follow the following steps. 2. Remove power and Ethernet cable. 3.

68 Troubleshooting Here are some useful tips on how to solve some common problems. Problem Solution I forgot the account and password for SD1306. H

69 Appendix SD1306 is compliant with microSD/SDHC card and to ensure recording quality, and please use memory cards over 2G and Class 4

70 COPYRIGHT © 2015 AVer Information Inc. All rights reserved. All rights of this object belong to AVer Information Inc. Reproduced or transmitt

71 Limited Warranty AVer Information, Inc. (“AVer”) warrants that the applicable product (“Product”) substantially conforms to AVer’s documentation f

72 Governing Law and Your Rights This warranty gives you specific legal rights; You may also have other rights granted under state law. These rights

4 MicroSD/SDHC card management Recording Trigger Motion Detection, IP Check, Network Status (wired connection only), Schedule, D.I. Video Format AV

5 Package Contents Item Descriptions 1. SD1306 2. Wall mount 3. Power Adaptor (AC 24V/1A) (optional item.) 4. CD (User’s Manual and Quick G