AVer FD2000 Instrukcja Użytkownika

AVer FD2000 User Manual

6 Hardware Installation and I/O Pin Assignment 1. Product Overview

7 Definition: Index # Name 1 Bracket 2 Body 3 Top Case

8 Network LED and Button Definition 2. Installation Step 1:  Use the mounting template label to mark-out and prepare the mounting area.  Drill a r

9 Step 2:  Use a screwdriver to swivel three screws to bring out three locking arms.  Tighten the screws sufficiently to compress the arms to adju

10 Step 4: Attach the camera housing with extra care on direction. Step 5: Fasten the camera by screwing cover to the pedestal with screws and compl

11 3. Disassembling the Camera Step 1: Loosen the screws on the cover. Step 2: Remove the camera housing

12 Step 3:  Pull down the camera while the bracket is still attached to the ceiling.  Move the two fasteners to take out the camera body. (Two of th

13 Step 4：：：：Pull down network cable and finish disassembly.

14 Power Over Ethernet (PoE) Set up the IP camera through Power over Ethernet (PoE). PoE is a technology that integrates power into a standard LAN inf

15 IP Assignment There are two ways to find IP Camera: − Finding IP Camera by using “NXU Lite recording software” − Finding IP Camera by using “AVe

16 3. Click “Setup” button. 4. Click “Add IPCam” button. 5. Select “IP Camera” item.

17 6. Key in IP Camera’s ID and Password (default is admin/admin) and click “Auto Search” to find camera. 7. In Search Result window, click it th

18 Finding IP Camera by using “AVer IPCam Utility” 1. Use the software, “AVer IPCam Utility” to assign the IP address of the IP camera. The software

19 The IE browser will open and direct you to IP camera login page. This requires IPViewer.ocx to run. If the IE ActiveX warning message appears, cli

20 Using DHCP Server/Router Network To use DHCP, please change the setting on the IE: IE  configuration  network setting enable DHCP function  App

21 Using NON-DHCP Server/Router Network In Non-DHCP server/router network, the static IP address must be assigned to the device each time when addin

22 IP camera IP addresses: A quick way to access remote monitoring is to double-click on a selected IP camera in “Camera Name list” in AVer IPCam U

23 Install ActiveX Control The first time you attempt to view the camera video via Internet Explorer, it will ask you to install the ActiveX componen

24 5 When the following dialogue box appears, click “Yes”.

25 Using the IP Camera Browser Interface The admin have the full access to the IP Camera browser interface. The menu on the left, you can expand and

Table of Contents PREFACE...

26 Name Function (4) FW Version Show IP camera’s current firmware version (5) Logout Exit the application (6) Stream status display Press bu

27 System > General In this section, only admin level is authorized to configure the IP camera system maintenance and the date and time settings.

28 Name Function (5) Network Camera Reboot Turn the IP camera off and on again. (6) Firmware Upgrade Upgrade the firmware to the latest version

29 System > General > Date & Time In the “Date & Time” tab, the administrator can set and update the system’s date and time. After fi

30 Name Function time. (effective in NTP mode only) System> General > Event Log In this section, it displays the IP camera system event log.

31 System > User Management In this section, only admin level is authorized to create, delete, and edit the account in Account tab and configure

32 System > User Management > Guest User There are five Guest Users. Enter the user name in “Username”, the password in “Password”, and re-en

33 System > Network Setting > Setting  Device Name: Key in the preferred device name to rename it. Default name is “ipcam”.  Network Type: I

34 System > Network Setting > RTSP Users can set RTSP port here. 1. RTSP URLs for Stream 1, Stream 2 and Stream3 are: rtsp://(ip address)

35 System > Image There are 2 tabs: Preference and Privacy Mask. System > Image>Preference In Preference tab, you can adjust the

SYSTEM > USER MANAGEMENT > GUEST USER ... 32 SYSTEM > NETWORK S

36  Sense up: Sense up can be enabled if the sensitivity is still not good enough under “High” gain condition at dark. Optimal image level can be mai

37 WDR: This function to provide clear images even under back light circumstances where intensity of illumination can vary excessively namely when th

38 System > Image > Privacy Zone For the security purpose, there are four areas can be setup for privacy mask. Click “Set Privacy Zone” butto

39 System > Video Stream > Profile There are up to six profiles to choose from. The one that users are using will be in Current Profile. In e

40 System > Audio FD2000 supports 1-way audio (mono). User can send audio from IP camera built-in MIC to remote site. a. IP Camera to PC: select

41 Event > Motion This function is designed to trigger a video recording when the unit detects a motion.  Motion Detection: Set “ON” to turn on m

42 Status Information  Networking Info: Displays network information of the IP camera.  Product Info: Displays product information of IP camera. .

43 Factory Default 1. Beside Ethernet jack, find the default hole at left side. 2. Press and hold for 5 seconds to return to factory default. 3. To r

44 Troubleshooting Here are some useful tips on how to solve some common problems. Problem Solution I forgot the account and password for FD2000. How

45 FCC NOTICE (Class B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may

1 Preface The FD2000 is an H.264 2-megapixel; full HD dome camera designed with ultra-discreet, recessed-mount and super mini dimension (

46 COPYRIGHT ©2013 AVer Information Inc. All rights reserved. All rights of this object belong to AVer Information Inc. Reproduced or transmitted i

47 Disclaimer of Warranty EXCEPT AS EXPRESSLY PROVIDED OTHERWISE HEREIN AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, AVER DI

2 Specifications Hardware RAM 256MB Flash 256MB Image Sensor 1/3” CMOS (2 megapixels) Lens Type Fixed lens, f=3.4mm Electric Shutter 1/25~ 1/8192

3 System Motion Detection Yes, 4 different areas Triggered Action N/A. All the triggered actions have to be done on VMS software or standalone NVR

4 Package contents Item Descriptions 1. FD2000 2. CD (User’s Manual and Quick Guide included) 3. Mounting template label *This model doesn’t su

5 Product Installation Monitor Setting 1. Right-click on the desktop. Select “ Properties” 2. Change “Color quality” to “Highest (32-bit)”.